11-06-2015, 08:41 AM
okay correct my 16v blew and I'm using just the shell of the 8v. The 16v is 2221 and the 8v is 2111. I know the pistons aren't the same.. I am ordering a new one. My question was if I can use the connecting rod from the size 2 off the 8v which was also first cylinder as my connecting rod for my new size 2 16v piston in the 8v shell. I am using just the 8v shell. I am going to use the 16v crank, 16v pistons and rods, the 16v rod caps. should I use the 16v crank caps in the 8v shell or put the 8v crank caps on the 16v crank. or should I just use the 8v crank and put the 16v stuff on it. and where are these bearings you are talking about?? where are they? how do I gauge them