8mm thread, ? it the tread sizes that matters, not head, and length. .75" is 20mm long, bolts,
M8 x20 means 8mm bolt, 20mm long. m means metric ,as all are on car, even lugs are metric. now.
lots of parts , even P/s ,mounts, A/c mounts, engine mounts, trans mounts, , and intake base ?
the intake man. has a mount , does these fit there? under intake man.?
yes, exposed to elements , a great clue that, you are good observer.
you only pulled the trans.(+4wd) right, not engine?
mounts, look at all mounts.
yes , generic spring on clutch cables, compressive works
its just to stop rattle there.
M8 x20 means 8mm bolt, 20mm long. m means metric ,as all are on car, even lugs are metric. now.
lots of parts , even P/s ,mounts, A/c mounts, engine mounts, trans mounts, , and intake base ?
the intake man. has a mount , does these fit there? under intake man.?
yes, exposed to elements , a great clue that, you are good observer.
you only pulled the trans.(+4wd) right, not engine?
mounts, look at all mounts.
yes , generic spring on clutch cables, compressive works
its just to stop rattle there.
http://www.fixkick.com