I think the small 10 mm bolt orphan is one that goes above to the shift lever mounting plate.
The two remaining orphan status 14mm bolts.. about 1/2" or 7/16" is used going through something (no washer) leaving about 1/4" to stick out into the air.
![[Image: rebolting2.jpg]](http://www.artlythere.com/image/rebolting2.jpg)
The two remaining orphan status 14mm bolts.. about 1/2" or 7/16" is used going through something (no washer) leaving about 1/4" to stick out into the air.