10-24-2015, 01:49 PM
(10-24-2015, 07:41 AM)GeoHacker Wrote: Anybody with a 1992 Tracker have a picture of the driver side engine (top view, down) they could post, showing manifold area, above, and below? And then one from the passenger side, kind of top view down too?
Not sure if fell from above given how long ago I started this, but have 3 bolts I can't find a home for yet. One is smallish, 10mm or 11, clean. The other 2 are 14's I think, and large, but also clean, no oil on them. So they didn't come from the transmission or front area there (clutch bell area).
Thanks for any help, or suggestions . (and thanks for all prior)
Good news, the beast is back in! Harbor Freight trans-jack to the rescue. Got for $80, great deal. Got things lined up just so, slid on like butter. Quite different from the removal. Thanks for putting up with me all this time.
I'm hoping the bolts go to manifold + exhaust system.