10-19-2015, 11:17 AM
(10-18-2015, 09:07 PM)fixkick Wrote: Sled.
the tranny crossmember, bolts? or the actual mount in center? 4 outer , crossmember bolts.?
i think, if you look at the member end bolts all 4 are same size so the remainder are center?
Thanks for the distributor info, will need that soon, that's for sure.
Sled : Have it figured out now, I think. It is the outer bolts though, they are not all the same, 2 are longer. Good news is seems I painted them yellow before I took them out, and forgot or prior removed did.
Driver's side of the sled is gravity assisted, overlays a flange area and the bolts hold it down), but the passenger side…there the bolts hold it up to the frame, and do all the holding. The 2 longer ones have a narrower tapered width at the tips, and the other shorter 2 are same width all the way to ends.
I'm thinking the longer ones go into the hold-up side, since a) paint matches and they have to get to that nut. Will consider that mystery solved. Not sure if I did that yellow paint or not, but if I did, I thank me for thinking ahead.
![Smile Smile](https://fixkick.com/forum/images/smilies/smile.gif)