10-15-2015, 09:50 PM
Cleaned plugs, it started and limped...so not ecu
I put a gauge on output of pump; same HF kit you pictured.
Gauge went well past 100, all the way around to zero pin...130-150psi !?!
Swapped regulator; no difference
as I am using a fuel cell, with the cap off i do not see fuel pumping back from return; should I?
I put a gauge on output of pump; same HF kit you pictured.
Gauge went well past 100, all the way around to zero pin...130-150psi !?!
Swapped regulator; no difference
as I am using a fuel cell, with the cap off i do not see fuel pumping back from return; should I?