preparing for the future

[dynabill]

part 17?
missing off shoe or backing plate?

Sorry it is part 18 it is the piece that moves the adjuster to tighten shoes as they wear. here is a pic of what i did. the nub was not there to hang that part on, there was only a hole in the brake shoe, so I drilled a larger hole and tapped it to fit that screw and locktited the screw in there. I had to do the same thing on the other side of the car too. the hole was eactly where the nub should have been pressed in, or welded in.

http://www.fixkick.com/bbs2/Suzuki-bbs/g...43_55.jpeg