there is only one. not 2.
the oil sender in on the left side of the block, dead center, at the main Oil gallery
1: wire fell off to it and is hitting frame.?
2: sender bad.
3: oil pressure is bad.
4: old engine running 0w oil, dont!
here i am, new block. step one, i get 50 psi, crankiing with no fuel in car. no spark.
sender out, gauge in.
![[Image: pressure-good.jpg]](http://www.fixkick.com/engine/97-motor-pull/images/pressure-good.jpg)
pS
if pressure is 0 , or near , kiss of rod #4, just like this motor, when i got it.
the oil sender in on the left side of the block, dead center, at the main Oil gallery
1: wire fell off to it and is hitting frame.?
2: sender bad.
3: oil pressure is bad.
4: old engine running 0w oil, dont!
here i am, new block. step one, i get 50 psi, crankiing with no fuel in car. no spark.
sender out, gauge in.
![[Image: pressure-good.jpg]](http://www.fixkick.com/engine/97-motor-pull/images/pressure-good.jpg)
pS
if pressure is 0 , or near , kiss of rod #4, just like this motor, when i got it.
http://www.fixkick.com
