07-04-2013, 02:23 PM
im sorry you have the wrong brakes,
how to mod 95 to 96, im clueless.
1,3,4,2 (slow but always sure way) Old hat , im sure......
TDC #1 set lash. (pulley at 0) yes rotor at 1 wire
turn crank 180deg CW, and #3 fires, if the lash is not there, it will burn the valves up fast.
turn crank 180 deg cw, for #4 fire and last
the turn crank 180deg cw, for #2 firing and lash.
which adjuster?, the nuts, screw or the follower plates and springs? fell of? im sure that was a big noise. ouch.
there are these tiny springs, that must not be missing, on the rocker plates.
how to mod 95 to 96, im clueless.
1,3,4,2 (slow but always sure way) Old hat , im sure......
TDC #1 set lash. (pulley at 0) yes rotor at 1 wire
turn crank 180deg CW, and #3 fires, if the lash is not there, it will burn the valves up fast.
turn crank 180 deg cw, for #4 fire and last
the turn crank 180deg cw, for #2 firing and lash.
which adjuster?, the nuts, screw or the follower plates and springs? fell of? im sure that was a big noise. ouch.
there are these tiny springs, that must not be missing, on the rocker plates.
http://www.fixkick.com