07-03-2013, 02:00 AM
yes, they tick and with some oils , more. 10w-30 will be pretty quiet.
you wont burn the valve that ticks, but as engine heats, that it must still have full lash. .007 MINIMUM HOT
the total 100% silent solid lifter , is the one to worry.
140f min. setting temp for best results. (in the old days , poor head gaskets, we had to set it again in 1 week after the gasket seated in. yours wont need that.)
it must not drop below .007 hot.
the 1995 book shows the actual temp.
992-95 16v: data; (Source 1995 ,Tracker 16v FSM pg. 6A2-12)
------------------------------------
When cold - Coolant 59-77 degrees F.:
Intake: .005 to .007
Exhaust: (same as intake above)
When hot - Coolant 140-154 degrees F.:
Intake: , .007 to .008)
Exhaust: (same as intake above)
you wont burn the valve that ticks, but as engine heats, that it must still have full lash. .007 MINIMUM HOT
the total 100% silent solid lifter , is the one to worry.
140f min. setting temp for best results. (in the old days , poor head gaskets, we had to set it again in 1 week after the gasket seated in. yours wont need that.)
it must not drop below .007 hot.
the 1995 book shows the actual temp.
992-95 16v: data; (Source 1995 ,Tracker 16v FSM pg. 6A2-12)
------------------------------------
When cold - Coolant 59-77 degrees F.:
Intake: .005 to .007
Exhaust: (same as intake above)
When hot - Coolant 140-154 degrees F.:
Intake: , .007 to .008)
Exhaust: (same as intake above)
http://www.fixkick.com