ball bearings. right? ah #11 (the tail shaft BALL bearing, )
nsk makes good parts, if not a counterfeited and there is no lack of that. not now. in china. (world class winners...in this illegal practices)
the bearing must not be loose. nor have funny colors... ball bearings do have clearances, and is published in the NSK catalog. (data sheets)
its too small to feel,
and all bearings are sold by grade. (cheap bearings can be bought, that have no business in any car)
imagine a huge productions setup, at the end of the line they are graded by (loose is toy bearings, and then class 10 bearings best)
just like intel microprocessors.. fast more expensive, but if cashe bits are bad, it's a Celeron...
the higher class (grade) bearing have the high RPM ratings...
id get a new Timken bearing.
beast in world and best tool steel too... no accident that.
that bearing is bad. its junk,
must be customer return , (what's there who knows?)
or china clone BS ! china has 600 bearing makers, most are trash, only few are ISO9000 rated. (but I can not spell or speak the names,,, my problem...)
buy the timken here in USA>
then see and feel that quality.
its will look prefect, no funny colors... or loose.
each top bearing maker has a counterfeit page. (no exceptions,...)
showing all this horror,.
even illegally stamping it with top makers name. not theirs.
in some cases the box , even is illegal. but looks like kids made box, and painted it in grade school. looks cheap. and IS.
nsk makes good parts, if not a counterfeited and there is no lack of that. not now. in china. (world class winners...in this illegal practices)
the bearing must not be loose. nor have funny colors... ball bearings do have clearances, and is published in the NSK catalog. (data sheets)
its too small to feel,
and all bearings are sold by grade. (cheap bearings can be bought, that have no business in any car)
imagine a huge productions setup, at the end of the line they are graded by (loose is toy bearings, and then class 10 bearings best)
just like intel microprocessors.. fast more expensive, but if cashe bits are bad, it's a Celeron...
the higher class (grade) bearing have the high RPM ratings...
id get a new Timken bearing.
beast in world and best tool steel too... no accident that.
that bearing is bad. its junk,
must be customer return , (what's there who knows?)
or china clone BS ! china has 600 bearing makers, most are trash, only few are ISO9000 rated. (but I can not spell or speak the names,,, my problem...)
buy the timken here in USA>
then see and feel that quality.
its will look prefect, no funny colors... or loose.
each top bearing maker has a counterfeit page. (no exceptions,...)
showing all this horror,.
even illegally stamping it with top makers name. not theirs.
in some cases the box , even is illegal. but looks like kids made box, and painted it in grade school. looks cheap. and IS.
http://www.fixkick.com