09-02-2015, 10:40 PM
those cooling methods are very good.
the gap is set pressing to a feeler gage, at the gap point, press just till kisses.
my data came from, 2 untouched transmission, but the factory tool to do this is a secret held by suz.
.010" thou seems ok, its just for preventing hot lockup. as all parts expand....
i think 10 thou is ok, on the lower amount. im sure its a range, really.... secret.
the gap is set pressing to a feeler gage, at the gap point, press just till kisses.
my data came from, 2 untouched transmission, but the factory tool to do this is a secret held by suz.
.010" thou seems ok, its just for preventing hot lockup. as all parts expand....
i think 10 thou is ok, on the lower amount. im sure its a range, really.... secret.
http://www.fixkick.com