08-19-2015, 11:06 AM
Well, tried it with new compression tester...
Same readings of 60 psi on #1 and 120 psi on #2-4...
Put the leak-down tester on each cylinder at TDC.
#1- could hear air rushing out of the exhaust at a fast rate!
#2- could hear air coming out at #4 at a slow pace, nothing like cylinder 1.
I stopped there because I figured that's as far as I need to go.
Is my next step to pull the head to inspect valves and cylinders? Assuming I have a blown head gasket?
Same readings of 60 psi on #1 and 120 psi on #2-4...
Put the leak-down tester on each cylinder at TDC.
#1- could hear air rushing out of the exhaust at a fast rate!
#2- could hear air coming out at #4 at a slow pace, nothing like cylinder 1.
I stopped there because I figured that's as far as I need to go.
Is my next step to pull the head to inspect valves and cylinders? Assuming I have a blown head gasket?
1992 Geo Tracker 5 speed 4x4 soft top, 8v with power steering and A/C