08-18-2015, 05:23 AM
I will get another compression tester and see what happens...
But my question is this: Say the compression tester wasn't any good, and the compression is actually fine with the engine. Why would it still not start when I tried it? Cam timing lined up correct, fuel, spark, and valves lashed...
Should I take the throttle body apart to see if some carbon particles didn't clog something up after I cleaned out the EGR? May be blocking some port messing up vacuum or?????
Just trying to think of things to examine to determine the issue...
But my question is this: Say the compression tester wasn't any good, and the compression is actually fine with the engine. Why would it still not start when I tried it? Cam timing lined up correct, fuel, spark, and valves lashed...
Should I take the throttle body apart to see if some carbon particles didn't clog something up after I cleaned out the EGR? May be blocking some port messing up vacuum or?????
Just trying to think of things to examine to determine the issue...
1992 Geo Tracker 5 speed 4x4 soft top, 8v with power steering and A/C