06-29-2013, 09:57 AM
bill,
that is very common practice . so take head off with the intake attached. it is hard to do the bottom bolts after, no lie.
question is to put intake on the head first then plant the whole works. Sure ! make sure EGR main is plated too.
all the best to you !
that is very common practice . so take head off with the intake attached. it is hard to do the bottom bolts after, no lie.
question is to put intake on the head first then plant the whole works. Sure ! make sure EGR main is plated too.
all the best to you !
http://www.fixkick.com