Greetings..and..Transmission

[GeoHacker]

the grease trick is , put max grease in hole there,
and then find a shaft that fits hole but not too tight, (junk box hunts) or a bolt that fits good. even duct taped up to fit snug. bam out.
hit shaft and bearing flies. out.

if you take your time the box will purr like kitten.

Thanks.

My pilot bearing is out, I used bread actually. Worked nice.

I am re-assembling the main shaft now.

What I am wondering is on the main shaft re-assembly, on the Low-speed hub (37)