Greetings..and..Transmission

[GeoHacker]

there is no after market here. nobody makes gears for suzuki boxes.
the 44 teeth should match yours.
id be all over the teeth.
if he knows year,

well the top center of tranny bell has the serial # and the letter code for year. what is that.>?
the decode is same as vin codes.
see A thru K codes here
http://www.fixkick.com/specs/VIN-motor-decoder.html


if i had his box serial number on top of bell i can look it up in the suzuki parts cat.

that taper dont matter. just teeth and diameters. (id /od)

my guess is his is a match.
but suzuki makes lots of boxes.

Thanks for the input.

I have not heard back from seller but that once, I will have to call. He not reply yet about price or if he ships.

Current status: except for 19 & 37 ? cogstuffs behind middle main bearing of main shaft (the gap-important one), all stuck behind that low gear bushing 18 (I think that's the one), I have it all apart. Only reason to pull the remainder would be to install a new syncro