05-26-2015, 08:18 AM
one could find a generic plug. and glue it in
but the dealer has them , seems the glue dries out,
so i used RTV , after cleaning holes with carb cleaner , all oil off.
that is where the GL4 goes. on most. its not a good deal for the box.
i can see the wash below the hole.. not good. that.
the case is glued together, using special sealant. ThreeBond 1211
https://www.google.com/webhp?gws_rd=ssl#...ebond+1211
the plug is cover on my pages. the photos shows the real suz p/n
http://www.fixkick.com/tranny/plugs.JPG
$1.44 each.
http://www.suzukicarparts.com/parts/1995...eid=214820
i think home depot as this drawer of rubber corks (lots of sizes), id cut it down and glue it in....
but the dealer has them , seems the glue dries out,
so i used RTV , after cleaning holes with carb cleaner , all oil off.
that is where the GL4 goes. on most. its not a good deal for the box.
i can see the wash below the hole.. not good. that.
the case is glued together, using special sealant. ThreeBond 1211
https://www.google.com/webhp?gws_rd=ssl#...ebond+1211
the plug is cover on my pages. the photos shows the real suz p/n
http://www.fixkick.com/tranny/plugs.JPG
$1.44 each.
http://www.suzukicarparts.com/parts/1995...eid=214820
i think home depot as this drawer of rubber corks (lots of sizes), id cut it down and glue it in....
http://www.fixkick.com