05-05-2015, 05:09 AM
(This post was last modified: 05-05-2015, 05:12 AM by barnbiketom.)
ok here are pics. EXACTLY the same as last TWO TIMES.
all the hoses correct position, and not kinked. the valve cover itself, I can blow thru BOTH metal lines but it is soaking as I type.
THE PCV VALVE didn't shake, but was stuck 'in between' so to say..I coujld blow thru it (either direction)
I replaced it along with the gasket last time in NOVEMBER..why is it bad already? and could i just VENT the valve cover with an after market vent on a hose!!!?????!!!??????
it looks like there is a vacuum inside the valve cover@$@$^^^
no blowby either, if you pull the dipstick OR the oil filler cap.. NO BLOWBY.. car runs fantastic 31 mpg every day
![[Image: IMG_20150504_121903_925.jpg]](http://i115.photobucket.com/albums/n289/tomsat/Mobile%20Uploads/IMG_20150504_121903_925.jpg)
all the hoses correct position, and not kinked. the valve cover itself, I can blow thru BOTH metal lines but it is soaking as I type.
THE PCV VALVE didn't shake, but was stuck 'in between' so to say..I coujld blow thru it (either direction)
I replaced it along with the gasket last time in NOVEMBER..why is it bad already? and could i just VENT the valve cover with an after market vent on a hose!!!?????!!!??????
it looks like there is a vacuum inside the valve cover@$@$^^^
no blowby either, if you pull the dipstick OR the oil filler cap.. NO BLOWBY.. car runs fantastic 31 mpg every day
![[Image: IMG_20150504_121903_925.jpg]](http://i115.photobucket.com/albums/n289/tomsat/Mobile%20Uploads/IMG_20150504_121903_925.jpg)
![[Image: IMG_20150504_121822_133.jpg]](http://i115.photobucket.com/albums/n289/tomsat/Mobile%20Uploads/IMG_20150504_121822_133.jpg)