i forgot to say obvious.
the 8v has tin lid, steel valve cover.
and the torque settings are tiny'
if set by guess, the metal bends and it sucks in. but at least leak.
35-44 Inch/Lbs
Inch not foot.
foot is div by 12.
were talking 4 foot lbs. which is extremely tiny.. i have 1/4?drive setup that can do 35 inch. (used on motor cycles on other small engines)
http://www.fixkick.com/specs/torque1.html
the 8v has tin lid, steel valve cover.
and the torque settings are tiny'
if set by guess, the metal bends and it sucks in. but at least leak.
35-44 Inch/Lbs
Inch not foot.
foot is div by 12.
were talking 4 foot lbs. which is extremely tiny.. i have 1/4?drive setup that can do 35 inch. (used on motor cycles on other small engines)
http://www.fixkick.com/specs/torque1.html
http://www.fixkick.com