04-23-2015, 09:45 AM
I screwed the bleed screw all the way in and it dropped the idle a little, still way too high though.
I took a picture of the bay as well as a short video, however the video does not capture when the idle is a constant up down up down every second.
http://i.imgur.com/wNcCdwX.jpg Here is the engine bay
https://www.youtube.com/watch?v=DzX57wCB1KU Here is the video
I will try to get a video with the idle surging when it happens again.
Apparently my OBD2 reader died, as it doesn't work on any of my cars now.
I pinched the ISC hose and it lowered the idle, but it's still very high.
I took a picture of the bay as well as a short video, however the video does not capture when the idle is a constant up down up down every second.
http://i.imgur.com/wNcCdwX.jpg Here is the engine bay
https://www.youtube.com/watch?v=DzX57wCB1KU Here is the video
I will try to get a video with the idle surging when it happens again.
Apparently my OBD2 reader died, as it doesn't work on any of my cars now.
I pinched the ISC hose and it lowered the idle, but it's still very high.