Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1996 Geo Tracker 1.6 16v Stalling when Warm
#26
screw the air bleed screw, in , CW on the TB. (top of Throttle body , under black plastic cap)
see if the ISC wakes up. (it can) wake up means it gains control of idle. again. and drops to 800 steady.
if not ,you have air leaks. to the plenum.

at hot idle, the Closed Loop status must be true, that is , closed loop active.
(i tend work CL first. as that means getting the AIR fuel ratio correct first,so that idle can have a chance (isc controls working)
http://www.fixkick.com
Reply


Messages In This Thread
RE: 1996 Geo Tracker 1.6 16v Stalling when Warm - by fixkick - 04-22-2015, 09:59 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)