Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Parts needed to run ECU
#7
the sst (i call this the mono port) is the best, its way easier to clean
the quad ports EGR is pure hell..

it is a way better design. for service.
hey do it 1 step at a time.
if car has no 53's and 51 ones only and ecu holds Closed loop, and mpg good, just ignore, 51s.
if 51s suck fuel, add the cat.
that;'s what id do, id let the ECU's dictate to me, with out the 58B box.
or buy one from canada, they have many due to most these cars have turned to rust and they get failed up there for that. and cars can not be licensed.
so ECU's are feed up./

i dont know how to use canada, ebay, mode. that be cool way to find them.

happy Pick and pulls to YOU !
http://www.fixkick.com
Reply


Messages In This Thread
Parts needed to run ECU - by jimlindenfelser - 04-03-2015, 06:40 AM
RE: Parts needed to run ECU - by fixkick - 04-03-2015, 09:21 AM
RE: Parts needed to run ECU - by jimlindenfelser - 04-03-2015, 01:52 PM
RE: Parts needed to run ECU - by fixkick - 04-03-2015, 10:46 PM
RE: Parts needed to run ECU - by fixkick - 04-03-2015, 11:50 PM
RE: Parts needed to run ECU - by jimlindenfelser - 04-04-2015, 01:28 AM
RE: Parts needed to run ECU - by fixkick - 04-04-2015, 01:59 AM
RE: Parts needed to run ECU - by jimlindenfelser - 04-04-2015, 02:04 PM
RE: Parts needed to run ECU - by fixkick - 04-04-2015, 10:19 PM

Forum Jump:


Users browsing this thread: 5 Guest(s)