Intermittant limpmode

[fixkick]

so check the output of maf, make sure it as the right voltage at 3 data points, keyon,idle and gunned.
yes that deft is daft. its just cheap china importer, and no real knowledge of part.
just use any pressure gauge, a pipe fitting from any gauge, even an oil pressure guage to 60 or 80 will work ,or the harbor frieght guage.
that summit racing fitting fits NPT threads, and all american pipe fits that.
never seen a Rhino adaptor but is in england, why buy from so far?

here is always to do it, i hope.

http://www.fixkick.com/INJECTORS/Schrader-vales.html

the summit fitting is Cream-de-la-cream, why need other part, very confused i am, why?

A 1/8" NPT pipe thread it is.


connect that to any guage, (real) by real i mean any bourdon tube guage.
air gauge.
oil gauge
hydraulic gauge.

first google hit
http://www.northerntool.com/shop/tools/p...aQodwjAAoA

at random,

nice gauge too.
all brass too. no junk plastic,

---

just to test
when done close off with 1/8" pipe cap plug. in the hole.
for next time.....
it is the best of best.

---

the best gauge for live data pressure driving is Stewart WARNER BUT ARE $$$$ , LIKE 10X THE DAFT GAGE.

---

I DO WISH YOU , GREAT SUCCESS !!!!