1994 tracker at 8v 4x4 50000 mi intermittent stall

[TC2]

I cleaned all grounds. I checked all connections. Finally, as the Guru said it would be I found the dizzy connector if slightly wiggled left and right the motor would die. Up and down made no change. Looking at the female side (wire) side of the plug I found the insert cracked allowing the female side of the pins to move causing the cmp loss. I was able to duplicate it over and over with just the slightest movement. I will have to find a replacement used or otherwise and solder it in the harness. Thank You so much fix-kick! You saved me so much headache not to mention the cost of a distributor. You sir are the Lao Tzu of the Tracker Samuri world.
Thanks again,
TC