02-19-2015, 04:12 AM
same here, too cold and OLD stock !,, they sell and accelerator option liquid tube. that worked. the 660 needs no air at all to cure, zero air. (oxygen zero)
i warpped min with tons of duct tape, for 2 days.. it finally set.
the harder loctite's work too. 300f temp ones. are very good. but 660 has the spec.(shear) once planted , timed and cured, it should stay like that forever.
great 175! very good.
its not easy to fix a crank tip that bad, so you get a big BRAVO on that job.
it will hold there, now, forever. at 94ft/lbs. and will last for life of crank seal, may be life of engine.
good news!!!
i warpped min with tons of duct tape, for 2 days.. it finally set.
the harder loctite's work too. 300f temp ones. are very good. but 660 has the spec.(shear) once planted , timed and cured, it should stay like that forever.
great 175! very good.
its not easy to fix a crank tip that bad, so you get a big BRAVO on that job.
it will hold there, now, forever. at 94ft/lbs. and will last for life of crank seal, may be life of engine.
good news!!!
http://www.fixkick.com