ECM Question

[jimlindenfelser]

Samurai will be on and off road.

I have the wiring from the donor. Engine came from a 92 MT 4 door Suzuki Sidekick. No need to smog.

I have completely rebuilt it. Also taken all the intake pieces apart and cleaned inside and out. ( FYI: There are only 3 orings left in the nation for the Fast Idle Air Valve).

I will be doing the modification of the harness.

I took the sidekick speedo apart and got the piece to add to my speedo.

I will not be installing motor till next winter so have time to get pieces together. So I don't mind trying to get the newer egr, intake, etc. as I find cars at the local pull and save which is a cheap source for parts.

There are two 97 Sidekicks there now but I assume are different egr, intake, etc. needed to run computer from a 95 ecm on my engine?

I have the 92 FSM, Warbirds harness swap instructions, and diagrams from fixkick. Ad could get a FSM for a newer vehicle if I were to go that route with parts.

I have plenty of time so willing to do more physical work than spend more money. The 92 ECM are pricey used.

But do not want to install the pieces to run a 96 or newer engine although those pieces are at the pull and save now.

Thanks