Throttle Body swap

[fixkick]

its very tricky all that and is not documented.
the kit works with many cars,
A/T and M/T

really the only trick is keep all holes open, water, sure that big hole, (lol) the all others too.
but never those drilling small holes.

image 16 that gasket is mostly there see it?
the slot gasket is top.

there are only 2 A/t BOTTOM GASKETS, SOME ARE EXTRA In this universal kit.

the slot gasket is on top of the heater plate.
the reg, gasket is bottom of that plate.

this is all that matters, here im making a home made gasket with Napa generic material.
the 5 tiny holes must be blocked.
http://www.fixkick.com/fresh-air/Slide_S...ge_14.html

home made.
http://www.fixkick.com/fresh-air/Slide_S...ges/P3.jpg
http://www.fixkick.com/fresh-air/Slide_S...ges/P3.jpg

---

if you look again the long slot arc slot goes to a medium hole, that passed through the bottom heater plate and to matching plenum hole.
above water hold seen here
http://www.fixkick.com/fresh-air/Slide_S...age_1.html