Well, I am not sure this isn't a Darwin in progress yet, but it's sturdy enough I think, and high enough. The red jackstands are the load bearers (and the bases) the 4 x 4 are insurance, and I will have a pair of the yellow as more insurance before I begin, along with some wood under the front tires. Just hope the bell isn't wider than my workspace once it comes down.
The red bottle jack is not there now, nor is that wood under it, was just a temp thing while I got things moved in.
Got the bearings kit, $109, with synchros, Nachi and Koyo.
Slow start, due to dread of this complex job, along with too much rain in the work zone.
![[Image: Darwin1e.jpg]](http://www.artlythere.com/image/Darwin1e.jpg)
![[Image: Darwin2e.jpg]](http://www.artlythere.com/image/Darwin2e.jpg)
The red bottle jack is not there now, nor is that wood under it, was just a temp thing while I got things moved in.
Got the bearings kit, $109, with synchros, Nachi and Koyo.
Slow start, due to dread of this complex job, along with too much rain in the work zone.