12-28-2014, 12:55 PM
(12-28-2014, 12:47 PM)fixkick Wrote: ECT is not connected, connect it and reset obd2 codes, see if it comes back, the ECT MUST WORK, OR ALL BETS OFF.
So cam timing. Crank 12pm and cam 12 pm on E? Correct?
Mostly, that is correct, if keys are not sheared x2.
NO, the dizzy is timed with E at 6pm, not 12pm (E @12 pm is #4 firing, not 1)
Then drop in distributor pointing at tower1? Or do I rotate the engine until #1 is firing then drop in dizzy?
always drop dizzy #1 firing only never 4.
it will run
That's what I have it set as. 6pm set at #1. Still have no start. ETC is connected and is reading. According to scanner. No other codes present. Do you have the injector wire harness color code to injectors? I have a feeling they messed up the injector harness and is dumping fuel in to cylinder after firing?