12-24-2014, 05:58 AM
I took the car to get scanned at autozone and it threw two codes, P0102 (MAF sensor) and P0135 (O2 sensors). On the printout for the MAF sensor it also says that a cracked throttle body intake tube can cause this issue. I looked, and found a problem there, I also took off the MAF, and found what look suspiciously like a burned out resistor or possibly fuse. Pictures below.
This is the crack.
This is zoomed out w/ cracked section circled
This is the burned out looking resistor/fuse on MAF sensor.
Would the crack shown cause a problem? And does the resistor look burned out to you guys? Input is greatly appreciated!
This is the crack.
This is zoomed out w/ cracked section circled
This is the burned out looking resistor/fuse on MAF sensor.
Would the crack shown cause a problem? And does the resistor look burned out to you guys? Input is greatly appreciated!