Login Register

Thread Rating:
  • 2 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
91 8V hard start long cranking on hot soak. cold great
#11
(12-20-2014, 07:26 AM)fixkick Wrote: it must be inspected, blocking the MAP , will cause limphone, instantly.
the map is easy to test. first for leaks then volts, i have a map test page.
but its working, im sure, only hose leaks are at issue on it.


this is easy to find, you have all air shut off, and it runs
that impossible or you have leaks, yes you, do....
where? we just block holes and find it , id bet one of those 2 holes in the TB leak, no?
if all gaskets are good. and the brake booster dont leak , where else is there, non?
the engine must no run with all air cut.

if the tb tests fail, then we only need to find the internal part that is bad,

you have a huge air leak.

I took off the snorkel to air filter..held my hand over the aluminum tbi cover extension.
Motor stalls instantly.. Im quitting for now.tired and cold hehe.. Next week im off monday and tuesday...grrrrrrr

Thanks so much for guidance...
Reply


Messages In This Thread
RE: 91 8V hard start long cranking on hot soak. cold great - by barnbiketom - 12-20-2014, 10:13 AM

Forum Jump:


Users browsing this thread: 6 Guest(s)