12-11-2014, 09:48 PM
Thanks for this post, I'm about ready to drop my own.
1: If you are removing that rear mount, while suspending the trans, can you remove the works without taking the exhaust off?
2: Saw somebody on YouTube saying you have to remove the distributor to get enough 'tilt' to remove the transmission, but the video wasn't that trust inspiring. Will it just back straight out and drop, if you have things set up right? Your steps seems to indicate it's ok to leave the distributor in (as long as you add the wood block between engine and firewall). (I have 1992 Geo Tracker)
(thanks)
rc
1: If you are removing that rear mount, while suspending the trans, can you remove the works without taking the exhaust off?
2: Saw somebody on YouTube saying you have to remove the distributor to get enough 'tilt' to remove the transmission, but the video wasn't that trust inspiring. Will it just back straight out and drop, if you have things set up right? Your steps seems to indicate it's ok to leave the distributor in (as long as you add the wood block between engine and firewall). (I have 1992 Geo Tracker)
(thanks)
rc