DENSO (like Delco here or Philips in Europe)
Nippon Denso or Denso for short.
our cars the 2 turn warning lamps are grounded in the cluster
then only 2 wires to left and right blinker. then the hazard switch is complex and overrides the blinker feeds.
i look at your nice 95 drawing.
that denso is pair of transistors? that allows (only) just a simple switch for hazards, ? that would save big money, unlike our , complex hazard switch.
pin 3 on the 95, does that go to a switch>?
long ago., like 7 years, someone in Europe told this is the hazard driver, (transistor pair) and one more fella in Japan.
id all those numbered pins on the 1995 first. and we can figure it out.
ah hah
1026
so that means, same gears on speedo cable
and the dial is just painted, in KPH not MPH, easy city.
cool, always wondered that.... thanks.
Nippon Denso or Denso for short.
our cars the 2 turn warning lamps are grounded in the cluster
then only 2 wires to left and right blinker. then the hazard switch is complex and overrides the blinker feeds.
i look at your nice 95 drawing.
that denso is pair of transistors? that allows (only) just a simple switch for hazards, ? that would save big money, unlike our , complex hazard switch.
pin 3 on the 95, does that go to a switch>?
long ago., like 7 years, someone in Europe told this is the hazard driver, (transistor pair) and one more fella in Japan.
id all those numbered pins on the 1995 first. and we can figure it out.
ah hah
1026
so that means, same gears on speedo cable
and the dial is just painted, in KPH not MPH, easy city.
cool, always wondered that.... thanks.
http://www.fixkick.com