12-08-2014, 11:47 PM
the rubber large hose, yes, i remember, and yes, they must not leak air, or it will go lean and bog. (the EFI system can correct for small leaks) but not more.
Its a shame they dont sell a injector seal kit for 4 cylinders. that fits and works.
some kits have 2 parts, why 2,? is that not odd?
there are 3 seals.
the 2 part rail high pressure seals see as 9 here.
and the vacuum seal at id 11. see here too. cushion name.
how to get this kit in the aftermarket is a pain, in the ash can.. you need #9 kit. no cushions.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=119
Its a shame they dont sell a injector seal kit for 4 cylinders. that fits and works.
some kits have 2 parts, why 2,? is that not odd?
there are 3 seals.
the 2 part rail high pressure seals see as 9 here.
and the vacuum seal at id 11. see here too. cushion name.
how to get this kit in the aftermarket is a pain, in the ash can.. you need #9 kit. no cushions.
http://www.fixkick.com/bbs2/Suzuki-bbs/e...iew&id=119
http://www.fixkick.com