11-30-2014, 02:41 PM
I ordered and received the hand-held tach from Amazon. After setting the freeze and adjusting the rpms, the timing is all over the place and not consistent. I decided to disassemble down to the timing belt again (I also had to replace the cover because the previous owners cut the bottom off.)
I removed the crank cog and looked at the keyway, looks very similar to (http://www.fixkick.com/t-belt/damage/images/damage1.jpg) with a lot of free play in the crank cog and crank, which is most likely why the engine does not run properly. I will follow the repair instructions using Loctite 660 and replace the crank cog since it looks worn too.
I removed the crank cog and looked at the keyway, looks very similar to (http://www.fixkick.com/t-belt/damage/images/damage1.jpg) with a lot of free play in the crank cog and crank, which is most likely why the engine does not run properly. I will follow the repair instructions using Loctite 660 and replace the crank cog since it looks worn too.