Fuel rail firewall side leaking gas?

[fixkick]

i'd take the rolled rim there, see that?, its roll crimped in the factory.
so grind the rim off and it pops open.
and get it welded.
(this word means real weld, not JB BS weld. it means brazing , TIG or MIG or STICK weld)

its fuel, ever watch or try to same some one in a fuel fire?

it's at 60PSI too, not like some gravity feed lawnmower.
respect it. and live.

see that rim, use a hack saw (after backing it dry) and cut the top off above the rim.
then gut it and weld it. or gut it and use real EPOXY, never JBnonweld , ever.