05-31-2013, 09:46 PM
that 335 is real. make sure the bolt on the crank snout is not loose. 17mm deep wall stock , IIRC.
you are blessed a donor near, by. that is really great.
my day 1 page (below)
http://www.fixkick.com/t-belt/pulley_off.html
if found tight, its a very good moment.
ok photos.
testing 1,2,3,,,,,,, i click Gallery button.
then engine.(example) then add picture
the title is mandatory, sorry
browse find a photo smaller than 2500x2500 pixels (huge)
find it, then loud it. and bingo
to link them , just look a them and capture the URL. and post that. or use the myimage link.
you are blessed a donor near, by. that is really great.
my day 1 page (below)
http://www.fixkick.com/t-belt/pulley_off.html
if found tight, its a very good moment.
ok photos.
testing 1,2,3,,,,,,, i click Gallery button.
then engine.(example) then add picture
the title is mandatory, sorry
browse find a photo smaller than 2500x2500 pixels (huge)
find it, then loud it. and bingo
to link them , just look a them and capture the URL. and post that. or use the myimage link.
http://www.fixkick.com