11-22-2014, 11:32 AM
the 95 came with 2 engine choices, 8v and 16v, first is to know what engine you have.? how many doors, 2 or 4?
1995, x valves, x doors. 4wd 5peed. this tells all i need, (the two engines run unique EFI systems)
do you have a voltmeter ? any at all?
the ecu has 2 power pins, that get power from MAIN
main must pull in , (energize) with key on,
im not going to look up if the geo relay work,its too late
those pins are clear. here.
ill guess 16v this show that drawing, type schematic in my search box and get
http://www.fixkick.com/schematics-run.html
the see this.
16v
see main, see blue-blk there
and pins A12 and A13 , both most be 12vdc key on.
main will have 12v on all pins key on and one pin with 0.7vdc (near zero) blue wire.
if 8v see its page.
i wish i new what you hot wired.
save me a ton of work knowing.....
1995, x valves, x doors. 4wd 5peed. this tells all i need, (the two engines run unique EFI systems)
do you have a voltmeter ? any at all?
the ecu has 2 power pins, that get power from MAIN
main must pull in , (energize) with key on,
im not going to look up if the geo relay work,its too late
those pins are clear. here.
ill guess 16v this show that drawing, type schematic in my search box and get
http://www.fixkick.com/schematics-run.html
the see this.
16v
see main, see blue-blk there
and pins A12 and A13 , both most be 12vdc key on.
main will have 12v on all pins key on and one pin with 0.7vdc (near zero) blue wire.
if 8v see its page.
i wish i new what you hot wired.
save me a ton of work knowing.....
http://www.fixkick.com