(05-27-2013, 03:34 AM)dynabill Wrote: Hi All, I was wondering if any one knows if this down pipe will work on a 1996 http://www.ebay.com/itm/1997-Geo-Tracker...2b&vxp=mtr it is for a 97 and po cut the cat out and rigged pipe in. I am looking to buy a new cat but if there is something else that will work, 1 piece unit with the down pipe, (Which is the part I really need ) I have mounting plate attached to muffler so I can make cat from rockauto work, I am not that particular, although i do need the downstream 02 sensor (which was cut) threaded insert on that end. Upstream is missing too, but rockauto has that available. So,If anyone has some ideas....cheers
unlike 92-95 , the 96+ cars are all 16v and are all 100% same exhaust manifold. no cal/fed unique sold or made by suzuki in USA./
i cant speak for any ebayer cloner, but , there is only one Suzuki part-number for this part.
it is 14190-58b02 (96-98)
the early years for this pipe, pre 96, were recalled do to , internal collapse and kills engine. (100% blockage) I have the TSB recall paper.
and suzuki ran out of the new part, nice , huh?
suzuki uses this same part on newer engines. and is insane expensive, (custom is cheaper, in any welding shop)
$350
http://suzukicarparts.com/parts/index.cf...eid=214820
i think we are lucky , some folks make them and sell them, give it a try and see how it fits. if the flags fits, but angle is wrong, any weld shop can cure that in a jiffy,
mr, bill. here is your, rag top parts list , , not all parts are over the top (no pun) expensive, some are very fairly priced.
http://www.fixkick.com/look/96-rag/96rag.pdf
http://www.fixkick.com