Before a reset I disconnect the battery. After reset the code is 12 when the fault reoccurs it is 45.
Yesterday after the voltage checks I drove the car for about 1 hour with a few stop starts and it was perfect. This happens with the car for a few days it would be ok then throw up a 45. Yes I have the bleed screw throttle body.
By idle pin do you mean the isc valve this I have cleaned and it works ok with a 12v feed from battery, I have not yet checked for ecu voltage at it or for continuity yet.
The throttle boby you show is like the one I have I have to resize my photos in order to send will send later.
Thanks.
Yesterday after the voltage checks I drove the car for about 1 hour with a few stop starts and it was perfect. This happens with the car for a few days it would be ok then throw up a 45. Yes I have the bleed screw throttle body.
By idle pin do you mean the isc valve this I have cleaned and it works ok with a 12v feed from battery, I have not yet checked for ecu voltage at it or for continuity yet.
The throttle boby you show is like the one I have I have to resize my photos in order to send will send later.
Thanks.