Fitted new engine with loom and ECU... cranks no start

[fixkick]

yes, late there, +6 hours from here , central time.
yes, 16v is B.
yes, obd1 there. only here obd2 , in 97

im no expert on immo, never touched one ,but have read some pages on yours.


yes ,the earthing of case, actives all the input filters on both.
btw, your close to getting it going.
just some simple thing, im sure.

but the ECU is IMMO version, so must get that happy command from IMMO box.
ok here it is:-
The check engine light is flashing FAST which denotes an immobiliser fault.
if you use the diagnostic jumper it will show 8x codes, for serial port or for immo fails.
it be smart to have earth ground so the comm onlines dont pickup noise.

No CEL lamp present is a hard row to hoe , no joy, it seems....
i have no manual on the IMMO.