09-25-2014, 06:14 AM
Fixkick,
When I was removing belts to do the timing belt, I found it extremely difficult to get to the rear alternator bolt that holds it to the mount. When I say "rear" it's the bolt that you have to access from the back of the alternator. There is a lot of stuff in the way to get a wrench on that particular bolt.
Is there a good tool to remove this bolt? Does a socket knuckle work? Is there some special tool to get to it?
thanks,
John
16v engine
When I was removing belts to do the timing belt, I found it extremely difficult to get to the rear alternator bolt that holds it to the mount. When I say "rear" it's the bolt that you have to access from the back of the alternator. There is a lot of stuff in the way to get a wrench on that particular bolt.
Is there a good tool to remove this bolt? Does a socket knuckle work? Is there some special tool to get to it?
thanks,
John
16v engine
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.