Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ring & Pinion
#3
I only flushed with clean oil no solvents. The oil that was drained out was very gritty. I replaced the outer wheel bearings 4 weeks ago with new seals & packed with grease. The diff gets very warm after driving around 20 miles. I will change the oil again this week and use synthetic and see if it helps. Can I use an additive like powerpunch with moly lube added? If any what would you recommend? Thanks in advance!!! Love your site!!!
Reply


Messages In This Thread
Ring & Pinion - by brocklanders - 09-17-2014, 05:53 AM
RE: Ring & Pinion - by fixkick - 09-17-2014, 11:03 PM
RE: Ring & Pinion - by brocklanders - 09-18-2014, 01:33 AM
RE: Ring & Pinion - by fixkick - 09-18-2014, 01:51 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)