09-16-2014, 04:21 AM
Fixkick,
If I replace the throttle body assembly on my 95 tracker with the square type TB assembly with water driven IAC valve and TPS, do I need to be concerned about re-setting the idle stop screw? Or, should it be set correctly as an assembly?
thanks,
John
If I replace the throttle body assembly on my 95 tracker with the square type TB assembly with water driven IAC valve and TPS, do I need to be concerned about re-setting the idle stop screw? Or, should it be set correctly as an assembly?
thanks,
John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.