05-11-2013, 01:27 AM
Running exhaust with cat and muffler. So my plan is to run my stock exhaust manifold (which I welded on the 4th pipe-let's see how long that lasts) then stock down pipe to flex pipe, continued by CAT and exiting the CAT I can use the scrap 2" stainless steel to the muffler and then to the end of tail pipe.
So I'll slide a round connector between G402 and the body so it interrupts the ground connection. That sounds easy enough. I'll install the switch inside the cabin, well hidden. My brother's corolla has a kill switch wire into the windshield wipers handle, so his car only starts with the wipers on the first position. fixkick, can you educate me briefly on why a magnetic switch is your preference over a regular toggle switch?
It's finally 70 degrees up here, I'm taking the top down today.
So I'll slide a round connector between G402 and the body so it interrupts the ground connection. That sounds easy enough. I'll install the switch inside the cabin, well hidden. My brother's corolla has a kill switch wire into the windshield wipers handle, so his car only starts with the wipers on the first position. fixkick, can you educate me briefly on why a magnetic switch is your preference over a regular toggle switch?
It's finally 70 degrees up here, I'm taking the top down today.
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c