Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PRNDL-switch how to release electrical connector
#3
It's the same connector as shown on the first photo in your 4 speed transmission photo tour.
http://www.fixkick.com/tranny/slush/slid...index.html
The connector harness is too short to allow access to get a photo. Could I possibly pull it out over the transmission to get to the connector that way? Where does the other end of the harness go?




(09-04-2014, 09:09 PM)fixkick Wrote: all connectors have locks.
and varies by devices. some are push (most) push lever, others are pull, only close examination shows which it is.

you could be the first. post a photo of yours, in the Gallery.
and we can see it. and say where to push.

many switches have been dismantled and cleaned and re-silcone greased, and now work.
depends on who made the PRNDL switch, suzuki buys them from many makers, Denso / Mitsubishi? and others.
1992 Sidekick, 4 door, 4-spd automatic, 1.6 L, 16 V, MPI
Reply


Messages In This Thread
RE: PRNDL-switch how to release electrical connector - by Azplinker - 09-05-2014, 12:38 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)