|
Thoughts on brake rotors...
|
09-03-2014, 10:28 AM
The factory rotors have the two threaded holes to release stubborn rotors. Not sure the aftermarket products have these holes. I see them in your photo at 3pm and 9pm. I think the FSM shows to use a 8mm bolt to release the rotor. It's nice when the factory concerns themselves with service! So many companies don't care.
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Thoughts on brake rotors... - by cosmic_splatter - 09-02-2014, 07:31 PM
RE: Thoughts on brake rotors... - by fixkick - 09-02-2014, 10:56 PM
RE: Thoughts on brake rotors... - by cosmic_splatter - 09-03-2014, 10:28 AM
RE: Thoughts on brake rotors... - by fixkick - 09-03-2014, 10:55 AM
|
