08-27-2014, 04:39 AM
sorry the P/S means power steering, when turn the steering to the stops, it overloads the pump then the engine, then the ECU sees this (o/l switch close) and raises idle 200 rpm from 800 to 1000
or the switch fails, or its wire shorts to ground and same.
an the harborfright link, is a tool with PDF manual and page 25 tells how to use duty cycle.
http://manuals.harborfreight.com/manuals.../98674.pdf
page 25 here.
or the switch fails, or its wire shorts to ground and same.
an the harborfright link, is a tool with PDF manual and page 25 tells how to use duty cycle.
http://manuals.harborfreight.com/manuals.../98674.pdf
page 25 here.
http://www.fixkick.com