08-20-2014, 10:52 AM
smp? no,
Dorman.? , no, only the rack they have.
suzuki sells it, right?
doormans cat calls it a fuel sending unit, no its a fuel pump rack.
watch out for 2 tanks, 4door and 2 door, both have different racks (pump) but the sender i can check. easy
did you check my fuel gauge page.
see gen1 ,gen2 and 3 comments.
gen one is 1 to 127 ohms per the FSM. (i showed tolerance error there)
89 to 95
and this TSB on 96 and up covers the variances starting in 1996 but not OHMS.
http://www.fixkick.com/All-Pdfs/TSB/tsb4...lguage.pdf
i do not know why you are looking in SAMMI direction? just hope ? for cheap parts? not sure.
in 1996 to 1997 the E20 sensors is 1 ohms tolerance, very accurate to do the EVAP tests,, because the tanks must be 3/4 full or less. and that makes this mandatory, EVAP 2 rules.
so if it fits, its more accurate.
new to old
the correct pn is 34810-60a11 and fits only SE series cars never SY sammi, SE means vitara,sidekick ad tracker, sunrunners, sanatana's all are kicks
and i cant think of anything off any sammi that fits this car, but that would take weeks of F6 searches no 1500 parts.
now ill look up this i 80700 num. ,ok that is only a SJ sammi fit, (the tanks have different depth)
the sammi ohms is 1 to 117 so light on the empty side. but would work ok , just ohms
but fit and float reach, ive no idea.
65 bucks at Suz
http://www.lehmansuzukipartsonline.com/p...eid=216897
Dorman.? , no, only the rack they have.
suzuki sells it, right?
doormans cat calls it a fuel sending unit, no its a fuel pump rack.
watch out for 2 tanks, 4door and 2 door, both have different racks (pump) but the sender i can check. easy
did you check my fuel gauge page.
see gen1 ,gen2 and 3 comments.
gen one is 1 to 127 ohms per the FSM. (i showed tolerance error there)
89 to 95
and this TSB on 96 and up covers the variances starting in 1996 but not OHMS.
http://www.fixkick.com/All-Pdfs/TSB/tsb4...lguage.pdf
i do not know why you are looking in SAMMI direction? just hope ? for cheap parts? not sure.
in 1996 to 1997 the E20 sensors is 1 ohms tolerance, very accurate to do the EVAP tests,, because the tanks must be 3/4 full or less. and that makes this mandatory, EVAP 2 rules.
so if it fits, its more accurate.
new to old
the correct pn is 34810-60a11 and fits only SE series cars never SY sammi, SE means vitara,sidekick ad tracker, sunrunners, sanatana's all are kicks
and i cant think of anything off any sammi that fits this car, but that would take weeks of F6 searches no 1500 parts.
now ill look up this i 80700 num. ,ok that is only a SJ sammi fit, (the tanks have different depth)
the sammi ohms is 1 to 117 so light on the empty side. but would work ok , just ohms
but fit and float reach, ive no idea.
65 bucks at Suz
http://www.lehmansuzukipartsonline.com/p...eid=216897
http://www.fixkick.com